Washer Repair in Sacramento

Washer Repair: common problems

• Not draining: a clogged pump filter or drain hose, or a failed drain pump.
• Not spinning: an unbalanced load, a worn lid switch or door lock, a drive belt or motor coupling, or the motor itself.
• Leaking: a torn door boot, worn inlet hoses, or a pump seal.
• Won’t start: door lock or latch faults, or a control board problem.
• Loud banging or shaking: worn suspension or shock absorbers, or a bearing problem.
• Bad smell: detergent and moisture buildup in the drum and door seal.

What we check

We confirm the symptom, test the part that most likely caused it, and show you what we found before repairing.

Safe things to try first

Make sure the load is balanced and the door is closed. On front-loaders, the pump filter (usually behind a small panel at the bottom front) can be cleaned: put a towel and shallow pan down first. Replace rubber inlet hoses about every five years.

Repair or replace?

Most washer repairs are worth doing. If the tub bearing or transmission has failed on an older machine, replacement may be wiser. We will give you a straight answer.

Thinking about a new washer? The ENERGY STAR washer guide covers efficiency and water use.